A new diffuse reflector filament for additive manufacturing of 3D printing finely-segmented plastic scintillator (2509.01247v1)

Abstract: This study presents the development and characterization of a novel white reflective filament suitable for additive manufacturing of finely segmented plastic scintillators using 3D printing. The filament is based on polycarbonate (PC) and polymethyl methacrylate (PMMA) polymers loaded with titanium dioxide (TiO$_2$) and polytetrafluoroethylene (PTFE) to enhance reflectivity. A range of filament compositions and thicknesses was evaluated through optical reflection and transmittance measurements. Reflective layers were made by using the Fused Deposition Modeling (FDM) technique. A 3D-segmented plastic scintillator prototype was made with fused injection modeling (FIM) and tested with cosmic rays to assess the light yield and the optical crosstalk. The results demonstrate the feasibility of producing compact and modular 3D-printed scintillator detectors with a performance analogous to standard plastic scintillator detectors, with lower light crosstalk, thus higher light yield, compared to past works, owing to the improved optical properties of the reflector material.