Selective area epitaxy of in-plane HgTe nanostrcutures on CdTe(001) substrate

Abstract: Semiconductor nanowires are believed to play a crucial role for future applications in electronics, spintronics and quantum technologies. A potential candidate is HgTe but its sensitivity to nanofabrication processes restrain its development. A way to circumvent this obstacle is the selective area growth technique. Here, in-plane HgTe nanostructures are grown thanks to selective area molecular beam epitaxy on a semi-insulating CdTe substrate covered with a patterned SiO$_{\mathrm{2}}$ mask. The shape of these nanostructures is defined by the in-plane orientation of the mask aperture along the <$110$>, <$1\bar{\mathrm{1}}0$>, or <$100$> direction, the deposited thickness, and the growth temperature. Several micron long in-plane nanowires can be achieved as well as more complex nanostructures such as networks, diamond structures or rings. A good selectivity is achieved with very little parasitic growth on the mask even for a growth temperature as low as $140${\deg}C and growth rate up to $0.5$ ML/s. For <$110$> oriented nanowires, the center of the nanostructure exhibits a trapezoidal shape with {$111$}B facets and two grains on the sides, while <$1\bar{\mathrm{1}}0$> oriented nanowires show {$111$}A facets with adatoms accumulation on the sides of the top surface. Transmission electron microscopy observations reveal a continuous epitaxial relation between the CdTe substrate and the HgTe nanowire. Measurements of the resistance with fourpoint scanning tunneling microscopy indicates a good electrical homogeneity along the main NW axis and a thermally activated transport. This growth method paves the way toward the fabrication of complex HgTe-based nanostructures for electronic transport measurements.