Making Graphene Nano Inductor Using Table Top Laser Engraver

Abstract: There is great interest in so-called nano-electronic devices due to the furious rate of device miniaturization. Fabrication of micro and nano scale resistors and capacitors have already been achieved steadily, but so far, there has been little development in the way of nano-scale coil inductors. This is because of the physical limitations in miniaturization of the design of a solenoid with wires coiled around a metallic core. So, while transistors get steadily smaller, basic inductors in electronics remained relatively bulky. Few methods exist for creating conductive polymer coils and graphene-based kinetic nano-inductors, but their large-scale fabrication process is complex and mostly beyond the current commercial technology available. So, a simpler, scalable, and robust fabrication technique is needed to overcome this bottleneck. In this work we demonstrate a new technique consisting of the laser lithography using a laser engraver of a (poly)vinyl alcohol (PVA)/graphene oxide film composite which results in a large inductive effect. We attribute this behavior to the formation of high curvature twisted screw dislocation type conductive pathways composed of polyacetylene chains linked by pi-pi interactions to reduced graphene oxide flakes resulting in inductive effect.