Translating Assembly Accuracy Requirements to Cut-Off Frequencies for Component Mode Synthesis (2304.05021v2)

Abstract: One of the most popular methods for reducing the complexity of assemblies of finite element models in the field of structural dynamics is component mode synthesis. A main challenge of component mode synthesis is balancing model complexity and model accuracy, because it is difficult to predict how component reduction influences assembly model accuracy. This work introduces an approach that allows for the translation of assembly model accuracy requirements in the frequency domain to the automatic selection of the cut-off frequencies for the model-order reduction (MOR) of components. The approach is based on a mathematical approach for MOR for coupled linear systems in the field of systems and control. We show how this approach is also applicable to structural dynamics models. We demonstrate the use of this approach in the scope of component mode synthesis (CMS) methods with the aim to reduce the complexity of component models while guaranteeing accuracy requirements of the assembly model. The proposed approach is illustrated on a mechanical, three-component structural dynamics system for which reduced-order models are computed that are reduced further compared to reduction using standard methods. This results in lower simulation cost, while maintaining the required accuracy.