ULC: A Unified and Fine-Grained Controller for Humanoid Loco-Manipulation (2507.06905v1)

Abstract: Loco-Manipulation for humanoid robots aims to enable robots to integrate mobility with upper-body tracking capabilities. Most existing approaches adopt hierarchical architectures that decompose control into isolated upper-body (manipulation) and lower-body (locomotion) policies. While this decomposition reduces training complexity, it inherently limits coordination between subsystems and contradicts the unified whole-body control exhibited by humans. We demonstrate that a single unified policy can achieve a combination of tracking accuracy, large workspace, and robustness for humanoid loco-manipulation. We propose the Unified Loco-Manipulation Controller (ULC), a single-policy framework that simultaneously tracks root velocity, root height, torso rotation, and dual-arm joint positions in an end-to-end manner, proving the feasibility of unified control without sacrificing performance. We achieve this unified control through key technologies: sequence skill acquisition for progressive learning complexity, residual action modeling for fine-grained control adjustments, command polynomial interpolation for smooth motion transitions, random delay release for robustness to deploy variations, load randomization for generalization to external disturbances, and center-of-gravity tracking for providing explicit policy gradients to maintain stability. We validate our method on the Unitree G1 humanoid robot with 3-DOF (degrees-of-freedom) waist. Compared with strong baselines, ULC shows better tracking performance to disentangled methods and demonstrating larger workspace coverage. The unified dual-arm tracking enables precise manipulation under external loads while maintaining coordinated whole-body control for complex loco-manipulation tasks.