Kilopixel Performance of the Kinetic Inductance Detectors for the Terahertz Intensity Mapper

Abstract: We characterize a flight-grade array of lumped-element kinetic inductance detectors (LEKIDs) developed for the long-wavelength module of the Terahertz Intensity Mapper (TIM). From an 864-pixel science array, we select 490 well-isolated resonators spanning the focal plane and readout band and measure their thermal response, optical responsivity, and noise using a ZCU111-based multitone readout system intended for flight. The thermal and optical response of the detector population is consistent with previous single-pixel measurements and can be described by Mattis-Bardeen theory under the influence of a change in Cooper pair or quasi-particle density. Under increasing blackbody loading, the measured noise transitions from a thermal generation-recombination-dominated floor to photon-noise-limited scaling, with the majority of detectors achieving photon-noise-limited operation by approximately 400 fW incident power, with a median detector noise-limited NEP of $$NEP_{det} = 1.1\times10^{-17} W \sqrt{Hz}$$. The measured photon-noise scaling implies a median optical efficiency of approximately 0.67, indicating additional unknown loss sources between the detectors and blackbody radiator, tentatively attributed to losses in the waveguide. These results demonstrate that the TIM LEKID architecture retains the required sensitivity when scaled to kilopixel-class arrays; the principal remaining challenges are array-level tone optimization, resonator tracking, and identification of frequency-domain collisions.