Strain-Rate- and Line-Length-Dependent Screw Dislocation Glide Mechanisms in BCC Refractory Metals and Alloys

Abstract: Plastic flow in body-centered cubic (BCC) metals and dilute/concentrated alloys is governed by the motion of <111> screw dislocations, whose glide is often impeded by cross-kinks (jogs). While existing strengthening models typically treat depinning as defect-assisted cutting or dislocation bowing, the combined strain-rate and dislocation-line-length dependence of cross-kink stability and effective obstacle spacing remains insufficiently resolved at the atomistic scale. Here, we combine conventional molecular dynamics and strain-boost hyperdynamics to investigate screw-dislocation glide in pure Nb and Mo, dilute Nb-Mo alloys, and equiatomic NbMo at 300 K over strain rates from 10^3 to 10^7 s^-1 and dislocation line lengths from 15 to 50 nm. We first demonstrate that low-strain-rate simulations require sufficiently long dislocation lines to capture consistent cross-kink behavior and strength-determining pinning events. Using the 50~nm configurations, we show that cross-kinks form not only in concentrated alloys but also in pure BCC metals, with their stability governed by the relative rates of kink nucleation and migration on primary and cross-slip planes, which differ between Nb- and Mo-rich systems due to distinct core structures and non-Schmid responses. At high strain rates, depinning proceeds predominantly via vacancy-interstitial cluster formation. In contrast, at low strain rates and long line lengths, alternative pathways emerge, including lateral cross-kink migration, three-dimensional forward--backward cross-slip, and prismatic loop formation. The effective obstacle spacing controlling the critical resolved shear stress therefore emerges from coupled thermodynamic roughening and kinetic evolution. These findings highlight the intrinsically rate-, length-, and chemistry-dependent nature of screw-dislocation strengthening in BCC alloys.