Prefill vs. Decode Bottlenecks: SRAM-Frequency Tradeoffs and the Memory-Bandwidth Ceiling

Abstract: Energy consumption dictates the cost and environmental impact of deploying LLMs. This paper investigates the impact of on-chip SRAM size and operating frequency on the energy efficiency and performance of LLM inference, focusing on the distinct behaviors of the compute-bound prefill and memory-bound decode phases. Our simulation methodology combines OpenRAM for energy modeling, LLMCompass for latency simulation, and ScaleSIM for systolic array operational intensity. Our findings show that total energy use is predominantly determined by SRAM size in both phases, with larger buffers significantly increasing static energy due to leakage, which is not offset by corresponding latency benefits. We quantitatively explore the memory-bandwidth bottleneck, demonstrating that while high operating frequencies reduce prefill latency, their positive impact on memory-bound decode latency is capped by the external memory bandwidth. Counter-intuitively, high compute frequency can reduce total energy by reducing execution time and consequently decreasing static energy consumption more than the resulting dynamic power increase. We identify an optimal hardware configuration for the simulated workload: high operating frequencies (1200MHz-1400MHz) and a small local buffer size of 32KB to 64KB. This combination achieves the best energy-delay product, balancing low latency with high energy efficiency. Furthermore, we demonstrate how memory bandwidth acts as a performance ceiling, and that increasing compute frequency only yields performance gains up to the point where the workload becomes memory-bound. This analysis provides concrete architectural insights for designing energy-efficient LLM accelerators, especially for datacenters aiming to minimize their energy overhead.