Adiabatic Capacitive Neuron: An Energy-Efficient Functional Unit for Artificial Neural Networks

Abstract: This paper introduces a new, highly energy-efficient, Adiabatic Capacitive Neuron (ACN) hardware implementation of an Artificial Neuron (AN) with improved functionality, accuracy, robustness and scalability over previous work. The paper describes the implementation of a \mbox{12-bit} single neuron, with positive and negative weight support, in an $\mathbf{0.18\mu m}$ CMOS technology. The paper also presents a new Threshold Logic (TL) design for a binary AN activation function that generates a low symmetrical offset across three process corners and five temperatures between $-55<sup>o$C and $125^o$C. Post-layout simulations demonstrate a maximum rising and falling offset voltage of 9$mV$ compared to conventional TL, which has rising and falling offset voltages of 27$mV$ and 5$mV$ respectively, across temperature and process. Moreover, the proposed TL design shows a decrease in average energy of 1.5$\%$ at the SS corner and 2.3$\%$ at FF corner compared to the conventional TL design. The total synapse energy saving for the proposed ACN was above 90$\%$ (over 12x improvement) when compared to a non-adiabatic CMOS Capacitive Neuron (CCN) benchmark for a frequency ranging from 500$kHz$ to 100$MHz$. A 1000-sample Monte Carlo simulation including process variation and mismatch confirms the worst-case energy savings of $&gt;$90$\%$ compared to CCN in the synapse energy profile. Finally, the impact of supply voltage scaling shows consistent energy savings of above 90$\%$ (except all zero inputs) without loss of functionality.