Evaporative Refrigeration Effect in Evaporation and Condensation between Two Parallel Plates

Abstract: It is well-known that evaporation can lead to cooling. However, little is known that evaporation can actually create a refrigeration effect, i.e., the vapor phase temperature can drop below the temperature of the liquid-vapor interface. This possibility was recently pointed out via modeling based on a quasi-continuum approach. Experimental evidence for this effect has been scarce so far. Here, we examine evaporation and condensation between two parallel plates, including the liquid films on both sides, by coupling the solution of the Boltzmann transport equation in the vapor phase with the continuum treatments in both liquid films. Our solution shows that the vapor phase temperature at the evaporating side can be much lower than the coldest wall temperature at the condensing surface, i.e., the evaporative refrigeration effect. Our work not only re-affirms the refrigeration effect, but clarifies that this effect is caused by two mechanisms. At the interface, the asymmetry in the distribution between the outgoing and the incoming molecules creates a cooling effect, which is the dominant mechanism. Additional cooling occurs within the Knudsen layer due to the sudden expansion similar to the Joule-Thomson effect, although with subtle differences in that the interfacial expansion is not an isenthalpic process. Our work will motivate future experiments to further confirm this prediction and explore its potential applications in air-conditioning and refrigeration.