Lifetime-limited Gigahertz-frequency Mechanical Oscillators with Millisecond Coherence Times

Abstract: High-frequency mechanical oscillators with long coherence times are essential to realizing a variety of high-fidelity quantum sensors, transducers, and memories. However, the unprecedented coherence times needed for quantum applications require exquisitely sensitive new techniques to probe the material origins of phonon decoherence and new strategies to mitigate decoherence in mechanical oscillators. Here, we combine non-invasive laser spectroscopy techniques with materials analysis to identify key sources of phonon decoherence in crystalline media. Using micro-fabricated high-overtone bulk acoustic-wave resonators ($\mu$HBARs) as an experimental testbed, we identify phonon-surface interactions as the dominant source of phonon decoherence in crystalline quartz; lattice distortion, subsurface damage, and high concentration of elemental impurities near the crystal surface are identified as the likely causes. Removal of this compromised surface layer using an optimized polishing process is seen to greatly enhance coherence times, enabling $\mu$HBARs with Q-factors of > 240 million at 12 GHz frequencies, corresponding to > 6 ms phonon coherence times and record-level f-Q products. Complementary phonon linewidth and time-domain ringdown measurements, performed using a new Brillouin-based pump-probe spectroscopy technique, reveal negligible dephasing within these oscillators. Building on these results, we identify a path to > 100 ms coherence times as the basis for high-frequency quantum memories. These findings clearly demonstrate that, with enhanced control over surfaces, dissipation and noise can be significantly reduced in a wide range of quantum systems.