Improving the energy density and flexibility of PMN-0.3PT based piezoelectric generator by composite designing

Abstract: Ceramics based piezoelectric generators are known for their high energy density and poor flexibility. In this work, v_r-PMN-0.3PT/PDMS 2-2 composite with optimum PMN-0.3PT content (v_r) was designed that demonstrated enhanced output energy density and superior mechanical flexibility under dynamic mechanical excitation. v_r-PMN-0.3PT/PDMS 2-2 composite with different PMN-PT reinforcement content (v_r) and two different reinforcement configurations were fabricated and characterized for effective electro-elastic properties and energy harvesting response. Parallelly, using the finite element method and analytical models, effective electromechanical properties were calculated. Composites with parallel connectivity of the reinforcement phase demonstrated enhanced piezoelectric charge coefficient even with low PMN-0.3PT content whereas the relative permittivity and elastic modulus exhibited a linearly increasing trend with reinforcement volume fraction. At a compressive load of 50 N and 5 Hz frequency, a piezoelectric generator (PG) based on a v_r = 0.2, v_r- PMN-0.3PT/PDMS 2-2 composite with parallel connectivity produced a maximum short-circuit current density of 69 nA/cm2 and an open-circuit electric field of 189 V/cm, translating to a maximum output power density of ~13 {\mu}W/cm3 higher than that of pristine PMN-0.3 PT based piezoelectric generator. Estimated mechanical flexibility was found to be ~53 % higher than that of pristine PMN-0.3PT.