Mu3e Integration Run 2021

Abstract: The Mu3e experiment at the Paul Scherrer Institute searches for the charged lepton flavor violating decay $\mu^+ \rightarrow e^+ e^+ e^-$. The experiment aims for an ultimate sensitivity of one in $10^{16}$ $\mu$ decays. The first phase of the experiment, currently under construction, will reach a branching ratio sensitivity of $2.5\times10^{-15}$ by observing $10^{8}$ $\mu$ decays per second over a year of data taking. The highly granular detector based on thin high-voltage monolithic active pixel sensors (HV-MAPS) and scintillating timing detectors will produce about 100 GB/s of data at these particle rates. The Field Programmable Gate Array (FPGA) based Mu3e Data Acquisition System will read out this data from the detector and reduce the event rate to 100 MB/s by selecting interesting events using a filter farm of graphics processing units. The paper presents the status of the data acquisition system (DAQ) and first results from the 2021 integration run, which for the first time operated a slice of the Mu3e detector at the $\pi$E5 muon beam line at the Paul Scherrer Institute (PSI).