Frequency offset tolerant synchronization signal design in NB-IoT

Abstract: Timing detection is the first step and very important in wireless communication systems. Timing detection performance is usually affected by the frequency offset. Therefore, it is a challenge to design the synchronization signal in massive narrowband Internet of Things (NB-IoT) scenarios where the frequency offset is usually large due to the low cost requirement. In this paper, we firstly proposed a new general synchronization signal structure with a couple of sequences which are conjugated to remove the potential timing error arose from large frequency offset. Then, we analyze the suitable sequence for our proposed synchronization signal structure and discuss a special ZC sequence as an example. Finally, the simulation results demonstrate our proposed synchronization signal can work well when the frequency offset is large. It means that our proposed synchronization signal design is very suitable for the massive NB-IoT.