Measurement of $D^0-\overline{D}^0$ mixing and search for $CP$ violation with $D^0\rightarrow K^+π^-$ decays (2407.18001v2)
Abstract: A measurement of the time-dependent ratio of the $D0\rightarrow K+\pi-$ to $\overline{D}0\rightarrow K+\pi-$ decay rates is reported. The analysis uses a sample of proton-proton collisions corresponding to an integrated luminosity of 6 fb${-1}$ recorded by the LHCb experiment from 2015 through 2018 at a center-of-mass energy of 13 TeV. The $D0$ meson is required to originate from a $D{*+}\rightarrow D0\pi+$ decay, such that its flavor at production is inferred from the charge of the accompanying pion. The measurement is performed simultaneously for the $K+\pi-$ and $K-\pi+$ final states, allowing both mixing and $CP$-violation parameters to be determined. The value of the ratio of the decay rates at production is determined to be $R_{K\pi} = (343.1 \pm 2.0) \times 10{-5}$. The mixing parameters are measured to be $c_{K\pi} = (51.4 \pm 3.5) \times 10{-4}$ and $c_{K\pi}{\prime} = (13 \pm 4) \times 10{-6}$, where $\sqrt{R_{K\pi}}c_{K\pi}$ is the linear coefficient of the expansion of the ratio as a function of decay time in units of the $D0$ lifetime, and $c_{K\pi}{\prime}$ is the quadratic coefficient, both averaged between the $K+\pi-$ and $K-\pi+$ final states. The precision is improved relative to the previous best measurement by approximately 60%. No evidence for $CP$ violation is found.
Paper Prompts
Sign up for free to create and run prompts on this paper using GPT-5.
Top Community Prompts
Collections
Sign up for free to add this paper to one or more collections.