An Actuator with Magnetic Restoration, Part I: Electromechanical Model and Identification (2312.04046v2)

Abstract: Electromechanical models are crucial in the design and control of motors and actuators. Modeling, identification, drive, and current control loop of a limited-rotation actuator with magnetic restoration is presented. New nonlinear and linearized electromechanical models are developed for the design of the drive as well as small and large signal controls of the actuator. To attain a higher accuracy and an efficient design, and the eddy-currents in the laminations and magnet are modeled. This involves analytically solving 1-D and 2-D diffusion equations, leading to the derivation of a lumped-element circuit for system-level analyses, such as control system design. Additionally, the study analyzes and incorporates the impact of pre-sliding friction. The actuator is prototyped, and the paper delves into the identification of the model, presenting a procedure for parameter extraction. A close agreement is observed between the results obtained from the model, finite element analysis, and experimental results. The superiority of the proposed model over previous approaches is highlighted. Part II of the paper is dedicated to the drive circuit, the current control, as well as linear and nonlinear position control system designs.