Exploration of improved, roller-based spreading strategies for cohesive powders in additive manufacturing via coupled DEM-FEM simulations

Abstract: Spreading of fine (D50 <=20um) powders into thin layers typically requires a mechanism such as a roller to overcome the cohesive forces between particles. Roller-based spreading requires careful optimization and can result in low density and/or inconsistent layers depending on the characteristics of the powder feedstock. Here, we explore improved, roller-based spreading strategies for highly cohesive powders using an integrated discrete element-finite element (DEM-FEM) framework. Powder characteristics are emulated using a self-similarity approach based on experimental calibration for a Ti-6Al-4V 0-20um powder. We find that optimal roller-based spreading relies on a combination of surface friction of the roller and roller kinematics that impart sufficient kinetic energy to break cohesive bonds between powder particles. However, excess rotation can impart excessive kinetic energy, causing ejection of particles and a non-uniform layer. Interestingly, the identified optimal surface velocities for counter-rotation as well as rotational oscillation are very similar, suggesting this quantity as the critical kinematic parameter. When these conditions are chosen appropriately, layers with packing fractions beyond 50% are predicted for layer thicknesses as small as ~2 times D90 of the exemplary powder, and the layer quality is robust with respect to substrate adhesion over a 10-fold range. The latter is an important consideration given the spatially varying substrate conditions in AM due to the combination of fused/bound and bare powder regions. As compared to counter-rotation, the proposed rotational oscillation is particularly attractive because it can overcome practical issues with mechanical runout of roller mechanisms. In particular, the application to rubber-coated rollers, which promises to reduce the risk of tool damage and particle streaking, is recommended for future investigation.