Quantum noise limited microwave amplification using a graphene Josephson junction (2204.02103v1)

Abstract: Josephson junctions (JJ) and their tunable properties, including their nonlinearities, form the core of superconducting circuit quantum electrodynamics (cQED). In quantum circuits, low-noise amplification of feeble microwave signals is essential and the Josephson parametric amplifiers (JPA) are the widely used devices. The existing JPAs are based on Al-AlOx-Al tunnel junctions realized in a superconducting quantum interference device geometry, where magnetic flux is the knob for tuning the frequency. Recent experimental realizations of 2D van der Waals JJs provide an opportunity to implement various cQED devices with the added advantage of tuning the junction properties and the operating point using a gate potential. While other components of a possible 2D van der Waals cQED architecture have been demonstrated -- quantum noise limited amplifier, an essential component, has not been realized. Here we implement a quantum noise limited JPA, using a graphene JJ, that has linear resonance gate tunability of 3.5 GHz. We report 24 dB amplification with 10 MHz bandwidth and -130 dBm saturation power; performance on par with the best single-junction JPAs. Importantly, our gate tunable JPA works in the quantum-limited noise regime which makes it an attractive option for highly sensitive signal processing. Our work has implications for novel bolometers -- the low heat capacity of graphene together with JJ nonlinearity can result in an extremely sensitive microwave bolometer embedded inside a quantum noise-limited amplifier. In general, our work will open up exploration of scalable device architecture of 2D van der Waals materials by integrating a sensor with the quantum amplifier.