Simultaneous beam based alignment measurement for multiple magnets (2203.14869v1)

Abstract: We propose a method to simultaneously determine the magnetic centers of multiple quadrupoles in a transport line or a storage ring. The method finds the magnet centers by correcting the orbit shift due to a change of the quadrupole gradient strengths with orbit correctors. The quadrupoles are selected with orbit corrector magnets and beam position monitors in between to ensure that orbit correction at the quadrupole locations can be achieved. The correction of the induced orbit shift is done by steering the orbit toward the quadrupole centers with correctors, using its response matrix with respect to the correctors. The response matrix can be measured or calculated. Simulations with a section of the Linac Coherent Light Source (LCLS) II and the SPEAR3 storage ring are done to demonstrate the feasibility and performance of the method. It is also experimentally tested on SPEAR3. The method can be extended for beam based alignment measurement of nonlinear magnets.