Experimental and numerical study of the effect of surface patterning on the frictional properties of polymer surfaces (2110.11838v1)

Abstract: We describe benchmark experiments to evaluate the frictional properties of laser patterned low-density polyethylene as a function of sliding velocity, normal force and humidity. The pattern is a square lattice of square cavities with sub-mm spacing. We find that dynamic friction decreases compared to non-patterned surfaces, since stress concentrations lead to anticipated detachment, and that stick-slip behavior is also affected. Friction increases with humidity, and the onset of stick-slip events occurs in the high humidity regime. Experimental results are compared with numerical simulations of a simplified 2-D spring-block model. A good qualitative agreement can be obtained by introducing a deviation from the linear behavior of the Amontons-Coulomb law with the load, due to a saturation in the effective contact area with pressure. This also leads also to the improvement of the quantitative results of the spring-block model by reducing the discrepancy with the experimental results, indicating the robustness of the adopted simplified approach, which could be adopted to design patterned surfaces with controlled friction properties.