2000 character limit reached
Micro-tensile tests on micromachined metal on polymer specimens: elasticity, plasticity and rupture (0805.0942v1)
Published 7 May 2008 in cs.OH
Abstract: This study is focused on the mechanical characterization of materials used in microelectronic and micro- electromechanical systems (MEMS) devices. In order to determine their mechanical parameters, a new deformation bench test with suitable micromachined specimens have been developed. Uniaxial tensile tests were performed on "low cost" specimens, consisting in electroplated thin copper films and structures, deposited on a polimide type substrate. Moreover, a cyclic mechanical actuation via piezoelectric actuators was tested on the same deformation bench. These experiments validate the device for performing dynamic characterization of materials, and reliability studies of different microstructures.