Turbulent ice-ocean boundary layers in the well-mixed regime: insights from direct numerical simulations (2404.09545v1)

Abstract: The meltwater mixing line (MML) model provides a theoretical prediction of near-ice water mass properties that is useful to compare with observations. If oceanographic measurements reported in a temperature-salinity diagram overlap with the MML prediction, then it is usually concluded that the local dynamics are dominated by the turbulent mixing of an ambient water mass with nearby melting ice. While the MML model is consistent with numerous observations, it is built on an assumption that is difficult to test with field measurements, especially near the ice boundary, namely that the effective (turbulent and molecular) salt and temperature diffusivities are equal. In this paper, this assumption is tested via direct numerical simulations of a canonical model for externally-forced ice-ocean boundary layers in a uniform ambient. We focus on the well-mixed regime by considering an ambient temperature close to freezing and run the simulations until a statistical steady state is reached. The results validate the assumption of equal effective diffusivities across most of the boundary layer. Importantly, the validity of the MML model implies a linear correlation between the mean salinity and temperature profiles normal to the interface that can be leveraged to construct a reduced ice-ocean boundary layer model based on a single scalar variable called thermal driving. We demonstrate that the bulk dynamics predicted by the reduced thermal driving model are in good agreement with the bulk dynamics predicted by the full temperature-salinity model. Then, we show how the results from the thermal driving model can be used to estimate the interfacial heat and salt fluxes, and the melt rate.