A Lightweight, High-Extension, Planar 3-Degree-of-Freedom Manipulator Using Pinched Bistable Tapes (2110.09751v2)
Abstract: To facilitate sensing and physical interaction in remote and/or constrained environments, high-extension, lightweight robot manipulators are easier to transport and reach substantially further than traditional serial chain manipulators. We propose a novel planar 3-degree-of-freedom manipulator that achieves low weight and high extension through the use of a pair of spooling bistable tapes, commonly used in self-retracting tape measures, which are pinched together to form a reconfigurable revolute joint. The pinching action flattens the tapes to produce a localized bending region, resulting in a revolute joint that can change its orientation by cable tension and its location on the tapes though friction-driven movement of the pinching mechanism. We present the design, implementation, kinematic modeling, stiffness behavior of the revolute joint, and quasi-static performance of this manipulator. In particular, we demonstrate the ability of the manipulator to reach specified targets in free space, reach a 2D target with various orientations, and maintain an end-effector angle or stationary bending point while changing the other. The long-term goal of this work is to integrate the manipulator with an unmanned aerial vehicle to enable more capable aerial manipulation.
- H. B. Khamseh, F. Janabi-Sharifi, and A. Abdessameud, “Aerial manipulation—a literature survey,” Robotics and Autonomous Systems, vol. 107, pp. 221–235, 2018.
- F. Forte, R. Naldi, A. Macchelli, and L. Marconi, “Impedance control of an aerial manipulator,” in American Control Conference, 2012, pp. 3839–3844.
- S.-J. Kim, D.-Y. Lee, G.-P. Jung, and K.-J. Cho, “An origami-inspired, self-locking robotic arm that can be folded flat,” Science Robotics, vol. 3, no. 16, p. eaar2915, 2018.
- Y. Yang, Y. Peng, H. Pu, H. Chen, X. Ding, G. S. Chirikjian, and S. Lyu, “Deployable parallel lower-mobility manipulators with scissor-like elements,” Mechanism and Machine Theory, vol. 135, pp. 226–250, 2019.
- K. Zhang, Y. Zhu, C. Lou, P. Zheng, and M. Kovač, “A design and fabrication approach for pneumatic soft robotic arms using 3d printed origami skeletons,” in IEEE International Conference on Soft Robotics. IEEE, 2019, pp. 821–827.
- Z. M. Hammond, N. S. Usevitch, E. W. Hawkes, and S. Follmer, “Pneumatic reel actuator: Design, modeling, and implementation,” in IEEE International Conference on Robotics and Automation, 2017, pp. 626–633.
- E. W. Hawkes, L. H. Blumenschein, J. D. Greer, and A. M. Okamura, “A soft robot that navigates its environment through growth,” Science Robotics, vol. 2, no. 8, 2017.
- A. J. Daton-Lovett, Q. M. Compton-Bishop, and R. G. Curry, “Deployable structures using bistable reeled composites,” in Smart Structures and Materials 2000: Active Materials: Behavior and Mechanics, vol. 3992. International Society for Optics and Photonics, 2000, pp. 636–646.
- M. R. Honeck, L. S. Smoot, Q. Y. Smithwick, E. J. Romaire, D. J. McCall, T. O. Sandin, A. B. Forster, and P. A. Chevako, “Sword device with retractable, internally illuminated blade,” Sep. 4 2018, US Patent 10,065,127.
- M. Taffetani, F. Box, A. Neveu, and D. Vella, “Limitations of curvature-induced rigidity: How a curved strip buckles under gravity,” Europhysics Letters, vol. 127, no. 1, p. 14001, 2019.
- V. Pini, J. Ruz, P. M. Kosaka, O. Malvar, M. Calleja, and J. Tamayo, “How two-dimensional bending can extraordinarily stiffen thin sheets,” Scientific Reports, vol. 6, no. 1, pp. 1–6, 2016.
- C. Vehar, S. Kota, and R. Dennis, “Closed-loop tape springs as fully compliant mechanisms: preliminary investigations,” in International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, vol. 46954, 2004, pp. 1023–1032.
- M. Jiang, Q. Yu, and N. Gravish, “Vacuum induced tube pinching enables reconfigurable flexure joints with controllable bend axis and stiffness,” in IEEE International Conference on Soft Robotics, 2021, pp. 315–320.
- B. H. Do, V. Banashek, and A. M. Okamura, “Dynamically reconfigurable discrete distributed stiffness for inflated beam robots,” in IEEE International Conference on Robotics and Automation, 2020, pp. 9050–9056.
- A. Firouzeh, M. Salerno, and J. Paik, “Stiffness Control with Shape Memory Polymer in Underactuated Robotic Origamis,” IEEE Transactions on Robotics, vol. 33, no. 4, pp. 765–777, 2017.
- N. S. Usevitch, Z. M. Hammond, M. Schwager, A. M. Okamura, E. W. Hawkes, and S. Follmer, “An untethered isoperimetric soft robot,” Science Robotics, vol. 5, no. 40, p. eaaz0492, 2020.
- K. A. Seffen and S. Pellegrino, “Deployment dynamics of tape springs,” Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences, vol. 455, no. 1983, pp. 1003–1048, 1999.
Collections
Sign up for free to add this paper to one or more collections.
Paper Prompts
Sign up for free to create and run prompts on this paper using GPT-5.
