Maximizing Specific Loss Power for Magnetic Hyperthermia by Hard-Soft Mixed Ferrites

Abstract: We report maximized specific loss power and intrinsic loss power approaching theoretical limits for AC magnetic field heating of nanoparticles. This is achieved by engineering the effective magnetic anisotropy barrier of nanoparticles via alloying of hard and soft ferrites. 22 nm Co0.03Mn0.28Fe2.7O4/SiO2 NPs reached a specific loss power value of 3417 W/gmetal at a field of 33 kA/m and 380 kHz. Biocompatible Zn0.3Fe2.7O4/SiO2 nanoparticles achieved specific loss power of 500 W/gmetal and intrinsic loss power of 26.8 nHm2/kg at field parameters of 7 kA/m and 380 kHz, below the clinical safety limit. Magnetic bone cement achieved heating adequate for bone tumor hyperthermia, incorporating ultralow dosage of just 1 wt% of nanoparticles. In cellular hyperthermia experiments, these nanoparticles demonstrated high cell death rate at low field parameters. Zn0.3Fe2.7O4/SiO2 nanoparticles show cell viabilities above 97% at concentrations up to 0.5 mg/ml within 48 hrs, suggesting toxicity lower than that of magnetite.