It's Not That Simple. An Analysis of Simple Test-Time Scaling (2507.14419v1)

Abstract: Prior work proposed simple test-time scaling, a method for replicating this scaling behavior with models distilled from o1-like models by manually controlling test-time compute: either scaling down by enforcing a maximum length or scaling up by iteratively appending "Wait" when the model is about to terminate its generation. This paper presents an analysis of simple test-time scaling and finds that the scaling behavior is largely attributed to scaling down by enforcing a maximum length. In contrast, fine-tuning on long CoT data distilled from o1-like models has no significant impact on scaling behavior, and scaling up by appending "Wait" leads to inconsistencies, as the model may oscillate between solutions. A key distinction exists between scaling down by enforcing a maximum length and scaling up test-time compute in o1-like models, such as DeepSeek-R1\@. These models are typically allowed to utilize as much compute as needed, with the only constraint being the model's maximum supported length. By learning to naturally scale up test-time compute during reinforcement learning, o1-like models surpass their peak performance when scaling up. In contrast, simple test-time scaling progressively imposes a lower upper limit on model performance as it scales down. While replicating the test-time scaling behavior of o1 models can be straightforward by scaling down, it is crucial to recognize that the goal of scaling test-time compute is to unlock higher performance -- beyond what the model could originally achieve -- rather than merely reproducing the appearance of scaling behavior.