Silicon Nitride C-Band Grating Coupler with Reduced Waveguide Back-Reflection Using Adaptively Corrected Elliptical Grates (2406.14413v1)

Abstract: We present experimental results for a fully etched C-band grating coupler with reduced back reflection fabricated in an 800 nm silicon nitride platform. Back-reflections are reduced by symmetrically interrupting the first few grates around the center axis of the propagating light. The span of the etched grates is gradually increased until they cover the full width. By interrupting the grates, light is reflected back obliquely, which leads to the excitation of higher-order modes that are scattered out of the structure. While this approach has been previously shown in silicon, it comes with a significant penalty in coupling efficiency of around 2.4 dB of extra loss in the layer stack investigated here. In this work, we present the design and measurement results of a grating coupler in which waveguide-to-waveguide back-reflections are suppressed by ~10 dB with this technique, while at the same time mitigating excess insertion losses by reshaping the grates as ellipses of varying eccentricity. This helps to compensate the phase front error induced by the interruption of the grates. This correction does not affect the level by which the back-reflection is suppressed, but reduces the insertion loss penalty from 2.4 dB to 1 dB.