Integrated lithium niobate photonic millimeter-wave radar (2311.09857v2)

Abstract: Millimeter-wave (mmWave,>30 GHz) radars are the key enabler in the coming 6G era for high-resolution sensing and detection of targets. Photonic radar provides an effective approach to overcome the limitations of electronic radars thanks to the high frequency, broad bandwidth, and excellent reconfigurability of photonic systems. However, conventional photonic radars are mostly realized in tabletop systems composed of bulky discrete components, whereas the more compact integrated photonic radars are difficult to reach the mmWave bands due to the unsatisfactory bandwidths and signal integrity of the underlining electro-optic modulators. Here, we overcome these challenges and demonstrate a centimeter-resolution integrated photonic radar operating in the mmWave V band (40-50 GHz) based on a 4-inch wafer-scale thin-film lithium niobate (TFLN) technology. The fabricated TFLN mmWave photonic integrated circuit consists of a first electro-optic modulator capable of generating a broadband linear frequency modulated mmWave radar waveform through optical frequency multiplication of a low-frequency input signal, and a second electro-optic modulator responsible for frequency de-chirp of the received reflected echo wave, therefore greatly relieving the bandwidth requirements for the analog-to-digital converter in the receiver. Thanks to the absence of optical and electrical filters in the system, our integrated photonic mmWave radar features continuous on-demand tunability of the center frequency and bandwidth, currently only limited by the bandwidths of electrical amplifiers. We achieve multi-target ranging with a resolution of 1.50 cm and velocity measurement with a resolution of 0.067 m/s. Furthermore, we construct an inverse synthetic aperture radar (ISAR) and successfully demonstrate the imaging of targets with various shapes and postures with a two-dimensional resolution of 1.50 cm * 1.06 cm.