A Lightweight, High-Extension, Planar 3-Degree-of-Freedom Manipulator Using Pinched Bistable Tapes
Abstract: To facilitate sensing and physical interaction in remote and/or constrained environments, high-extension, lightweight robot manipulators are easier to transport and reach substantially further than traditional serial chain manipulators. We propose a novel planar 3-degree-of-freedom manipulator that achieves low weight and high extension through the use of a pair of spooling bistable tapes, commonly used in self-retracting tape measures, which are pinched together to form a reconfigurable revolute joint. The pinching action flattens the tapes to produce a localized bending region, resulting in a revolute joint that can change its orientation by cable tension and its location on the tapes though friction-driven movement of the pinching mechanism. We present the design, implementation, kinematic modeling, stiffness behavior of the revolute joint, and quasi-static performance of this manipulator. In particular, we demonstrate the ability of the manipulator to reach specified targets in free space, reach a 2D target with various orientations, and maintain an end-effector angle or stationary bending point while changing the other. The long-term goal of this work is to integrate the manipulator with an unmanned aerial vehicle to enable more capable aerial manipulation.
- H. B. Khamseh, F. Janabi-Sharifi, and A. Abdessameud, “Aerial manipulation—a literature survey,” Robotics and Autonomous Systems, vol. 107, pp. 221–235, 2018.
- F. Forte, R. Naldi, A. Macchelli, and L. Marconi, “Impedance control of an aerial manipulator,” in American Control Conference, 2012, pp. 3839–3844.
- S.-J. Kim, D.-Y. Lee, G.-P. Jung, and K.-J. Cho, “An origami-inspired, self-locking robotic arm that can be folded flat,” Science Robotics, vol. 3, no. 16, p. eaar2915, 2018.
- Y. Yang, Y. Peng, H. Pu, H. Chen, X. Ding, G. S. Chirikjian, and S. Lyu, “Deployable parallel lower-mobility manipulators with scissor-like elements,” Mechanism and Machine Theory, vol. 135, pp. 226–250, 2019.
- K. Zhang, Y. Zhu, C. Lou, P. Zheng, and M. Kovač, “A design and fabrication approach for pneumatic soft robotic arms using 3d printed origami skeletons,” in IEEE International Conference on Soft Robotics. IEEE, 2019, pp. 821–827.
- Z. M. Hammond, N. S. Usevitch, E. W. Hawkes, and S. Follmer, “Pneumatic reel actuator: Design, modeling, and implementation,” in IEEE International Conference on Robotics and Automation, 2017, pp. 626–633.
- E. W. Hawkes, L. H. Blumenschein, J. D. Greer, and A. M. Okamura, “A soft robot that navigates its environment through growth,” Science Robotics, vol. 2, no. 8, 2017.
- A. J. Daton-Lovett, Q. M. Compton-Bishop, and R. G. Curry, “Deployable structures using bistable reeled composites,” in Smart Structures and Materials 2000: Active Materials: Behavior and Mechanics, vol. 3992. International Society for Optics and Photonics, 2000, pp. 636–646.
- M. R. Honeck, L. S. Smoot, Q. Y. Smithwick, E. J. Romaire, D. J. McCall, T. O. Sandin, A. B. Forster, and P. A. Chevako, “Sword device with retractable, internally illuminated blade,” Sep. 4 2018, US Patent 10,065,127.
- M. Taffetani, F. Box, A. Neveu, and D. Vella, “Limitations of curvature-induced rigidity: How a curved strip buckles under gravity,” Europhysics Letters, vol. 127, no. 1, p. 14001, 2019.
- V. Pini, J. Ruz, P. M. Kosaka, O. Malvar, M. Calleja, and J. Tamayo, “How two-dimensional bending can extraordinarily stiffen thin sheets,” Scientific Reports, vol. 6, no. 1, pp. 1–6, 2016.
- C. Vehar, S. Kota, and R. Dennis, “Closed-loop tape springs as fully compliant mechanisms: preliminary investigations,” in International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, vol. 46954, 2004, pp. 1023–1032.
- M. Jiang, Q. Yu, and N. Gravish, “Vacuum induced tube pinching enables reconfigurable flexure joints with controllable bend axis and stiffness,” in IEEE International Conference on Soft Robotics, 2021, pp. 315–320.
- B. H. Do, V. Banashek, and A. M. Okamura, “Dynamically reconfigurable discrete distributed stiffness for inflated beam robots,” in IEEE International Conference on Robotics and Automation, 2020, pp. 9050–9056.
- A. Firouzeh, M. Salerno, and J. Paik, “Stiffness Control with Shape Memory Polymer in Underactuated Robotic Origamis,” IEEE Transactions on Robotics, vol. 33, no. 4, pp. 765–777, 2017.
- N. S. Usevitch, Z. M. Hammond, M. Schwager, A. M. Okamura, E. W. Hawkes, and S. Follmer, “An untethered isoperimetric soft robot,” Science Robotics, vol. 5, no. 40, p. eaaz0492, 2020.
- K. A. Seffen and S. Pellegrino, “Deployment dynamics of tape springs,” Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences, vol. 455, no. 1983, pp. 1003–1048, 1999.
Paper Prompts
Sign up for free to create and run prompts on this paper using GPT-5.
Top Community Prompts
Collections
Sign up for free to add this paper to one or more collections.
