Functional Failure Rate Due to Single-Event Transients in Clock Distribution Networks (2002.05455v1)

Abstract: With technology scaling, lower supply voltages, and higher operating frequencies clock distribution networks become more and more vulnerable to transients faults. These faults can cause circuit-wide effects and thus, significantly contribute to the functional failure rate of the circuit. This paper proposes a methodology to analyse how the functional behaviour is affected by Single-Event Transients in the clock distribution network. The approach is based on logic-level simulation and thus, only uses the register-transfer level description of a design. Therefore, a fault model is proposed which implements the main effects due to radiation-induced transients in the clock network. This fault model enables the computation of the functional failure rate caused by Single-Event Transients for each individual clock buffer, as well as the complete network. Further, it allows the identification of the most vulnerable flip-flops related to Single-Event Transients in the clock network. The proposed methodology is applied in a practical example and a fault injection campaign is performed. In order to evaluate the impact of Single-Event Transients in clock distribution networks, the obtained functional failure rate is compared to the error rate caused by Single-Event Upsets in the sequential logic.