Coronal heating in coupled photosphere-chromosphere-coronal systems: turbulence and leakage

Abstract: Coronal loops act as resonant cavities for low frequency fluctuations that are transmitted from the deeper layers of the solar atmosphere and are amplified in the corona, triggering nonlinear interactions. However trapping is not perfect, some energy leaks down to the chromosphere, thus limiting the turbulence development and the associated heating. We consider the combined effects of turbulence and leakage in determining the energy level and associated heating rate in models of coronal loops which include the chromosphere and transition region. We use a piece-wise constant model for the Alfven speed and a Reduced MHD - Shell model to describe the interplay between turbulent dynamics in the direction perpendicular to the mean field and propagation along the field. Turbulence is sustained by incoming fluctuations which are equivalent, in the line-tied case, to forcing by the photospheric shear flows. While varying the turbulence strength, we compare systematically the average coronal energy level (E) and dissipation rate (D) in three models with increasing complexity: the classical closed model, the semi-open corona model, and the corona-chromosphere (or 3-layer) model, the latter two models allowing energy leakage. We find that: (i) Leakage always plays a role (even for strong turbulence), E and D are systematically lower than in the line-tied model. (ii) E is close to the resonant prediction, i.e., assuming effective turbulent correlation time longer than the Alfven coronal crossing time (Ta). (iii) D is close to the value given by the ratio of photospheric energy divided by Ta (iv) The coronal spectra exibits an inertial range with 5/3 spectral slope, and a large scale peak of trapped resonant modes that inhibit nonlinear couplings. (v) In the realistic 3-layer model, the two-component spectrum leads to a damping time equal to the Kolmogorov time reduced by a factor u_rms/Va_corona