Origin of the low precipitation hardening in magnesium alloys (2402.06652v1)

Abstract: In this work electron backscattered diffraction (EBSD)-assisted slip trace analysis and transmission electron microscopy have been utilized to investigate the interaction of basal dislocations with precipitates in the Mg alloys Mg-1%wt.Mn-0.7%wt.Nd (MN11) and Mg-9%wt.Al-1%wt.Zn (AZ91), with the ultimate aim of determining the origin of their poor precipitation hardening. Precipitates in these alloys have a plate-shaped morphology, with plates being, respectively, perpendicular (MgxNdy) and parallel (Mg17Al12) to the basal plane of the magnesium matrix. Mechanical tests were carried out in solid solution and peak-aged samples, in tension and compression, both at RT and at moderate temperature (250C). EBSD-assisted slip trace analysis revealed a clear dominance of basal slip under a wide range of testing conditions in the peak-aged MN11 and AZ91 alloys. At room temperature, the origin of the low precipitation hardening observed lies at the easiness with which precipitates are sheared by basal dislocations, due to the lattice matching at the interface with the Mg matrix. At high temperature, dislocation-precipitate interactions are highly dependent on the deformation mode. In tension, enhanced basal slip localization gives rise to high stress concentrations at the intersection between coarse slip traces and particle interfaces, leading to precipitate fracture; in compression, a more homogenous distribution of basal slip leads to the dominance of particle shearing. Our study demonstrates experimentally that basal dislocations are able to shear, and even fracture, the MgxNdy and Mg17Al12 plates when, for appropriate testing conditions, the local stress due to dislocation accumulation at particle interfaces exceeds the precipitate strength.