Length-scale dependent average structures, piezoelectricity enhancement and depolarization mechanisms in a non-MPB high-performance piezoelectric alloy system PbTiO3-Bi(Zr1/2Ni1/2)O3

Abstract: There is a general perception that large piezoelectric response in ferroelectric alloys requires tuning the system towards a morphotropic phase boundary (MPB), i.e., a composition driven inter-ferroelectric instability. Here we show that high piezoelectric response can be realized even in non-MPB alloy systems. This is demonstrated on (1-x)PbTiO3-(x)Bi(Zr0.5Ni0.5)O3 (PT-BNZ) by a comprehensive study involving electric-field and temperature dependent XRD, Raman spectroscopy, dielectric, piezoelectric and high field electrostrain measurements. We found that poling-field irreversibly suppresses the cubic-like phase at room temperature. Based on our results, we argue that that which appears as MPB, comprising of tetragonal and cubic-like phases on the global scale, is not so actually. The large piezoresponse is due to coexistence of tetragonal regions of long and short-range coherence. The PT-BNZ system is therefore qualitatively different from the conventional MPB systems such as PZT, PMN-PT, and PbTiO3-BiScO3, etc., which exhibits coexisting tetragonal and rhombohedral/monoclinic phases in thermodynamic equilibrium. In the absence of inter-ferroelectric instability as a phenomenon, field induced polarization-rotation and inter-ferroelectric transformation are no longer plausible mechanisms to explain the large piezoelectric response in PT-BNZ. The large piezoelectricity is primarily due to enhanced mobility of the tetragonal domain walls enabled by domain miniaturization. Our study proves that attainment of large piezoelectricity does not require inter-ferroelectric instability as a necessary criterion.