Profile Control of a Borosilicate-Glass Groove Formed by Deep Reactive Ion Etching (0802.3085v1)

Abstract: Deep reactive ion etching (DRIE) of borosilicate glass and profile control of an etched groove are reported. DRIE was carried out using an anodically bonded silicon wafer as an etching mask. We controlled the groove profile, namely improving its sidewall angle, by removing excessively thick polymer film produced by carbonfluoride etching gases during DRIE. Two fabrication processes were experimentally compared for effective removal of the film : DRIE with the addition of argon to the etching gases and a novel combined process in which DRIE and subsequent ultrasonic cleaning in DI water were alternately carried out. Both processes improved the sidewall angle, and it reached 85o independent of the mask-opening width. The results showed the processes can remove excessive polymer film on sidewalls. Accordingly, the processes are an effective way to control the groove profile of borosilicate glass.