Adaptive Dead-Zone Dual Sliding Mode Observer for Reliable Electrochemical Model-Based SOC Estimation (2508.21610v1)

Abstract: Accurate state of charge (SOC) estimation is critical for ensuring the safety, reliability, and efficiency of lithium-ion batteries in electric vehicles and energy storage systems. Electrochemical models provide high fidelity for SOC estimation but introduce challenges due to parameter variations, nonlinearities, and computational complexity. To address these issues, this paper proposes an adaptive dead-zone dual sliding mode observer(SMO) based on an improved electrochemical single-particle model. The algorithm integrates a state observer for SOC estimation and a parameter observer for online parameter adaptation. A Lyapunov-derived adaptive dead-zone is introduced to ensure stability, activating parameter updates only when the terminal voltage error lies within a rigorously defined bound. The proposed method was validated under constant-current and UDDS dynamic conditions. Results demonstrate that the adaptive dead-zone dual SMO achieves superior accuracy compared with conventional dual SMO and equivalent circuit model-based EKF methods, maintaining SOC estimation errors within 0.2% under correct initialization and below 1% under a 30% initial SOC error, with rapid convergence. Computational efficiency analysis further shows that the adaptive dead-zone dual sliding mode observer reduces execution time compared with the conventional dual SMO by limiting unnecessary parameter updates, highlighting its suitability for real-time battery management applications. Moreover, robustness under battery aging was confirmed using a cycle-aging model, where the adaptive dead-zone dual SMO maintained stable SOC estimation despite parameter drift. These findings indicate that the proposed method offers a reliable, accurate, and computationally efficient solution for SOC estimation.