Enhancing Irradiation Resistance in Refractory Medium Entropy Alloys with Simplified Chemistry (2406.15022v1)

Abstract: Refractory High-Entropy Alloys (RHEAs) hold promising potential to be used as structural materials in future nuclear fusion reactors, where W and its alloys are currently leading candidates. Fusion materials must be able to withstand extreme conditions, such as (i) severe radiation-damage arising from highly-energetic neutrons, (ii) embrittlement caused by implantation of H and He ions, and (iii) exposure to extreme high-temperatures and thermal gradients. Recent research demonstrated that two RHEAs - the WTaCrV and WTaCrVHf - can outperform both coarse-grained and nanocrystalline W in terms of its radiation response and microstructural stability. Chemical complexity and nanocrystallinity enhance the radiation tolerance of these new RHEAs, but their multi-element nature, including low-melting Cr, complicates bulk fabrication and limits practical applications. We demonstrate that reducing the number of alloying elements and yet retain high-radiation tolerance is possible within the ternary system W-Ta-V via synthesis of two novel nanocrystalline refractory medium-entropy alloys (RMEAs): the W${53}$Ta${44}$V${3}$ and W${53}$Ta${42}$V${5}$ (in at.\%). We experimentally show that the radiation response of the W-Ta-V system can be tailored by small additions of V, and such experimental result was validated with theoretical analysis of chemical short-range orders (CSRO) from combined ab-initio atomistic Monte-Carlo modeling. It is predicted from computational analysis that a small change in V concentration has a significant effect on the Ta-V CRSO between W${53}$Ta${44}$V${3}$ and W${53}$Ta${42}$V${5}$ leading to radiation-resistant microstructures in these RMEAs from chemistry stand-point of views. We deviate from the original high-entropy alloy concept to show that high radiation resistance can be achieved in systems with simplified chemical complexity.