Inverse design and additive manufacturing of shape-morphing structures based on functionally graded composites (2307.05805v1)

Abstract: Shape-morphing structures possess the ability to change their shapes from one state to another, and therefore, offer great potential for a broad range of applications. A typical paradigm of morphing is transforming from an initial two-dimensional (2D) flat configuration into a three-dimensional (3D) target structure. One popular fabrication method for these structures involves programming cuts in specific locations of a thin sheet material (i.e.~kirigami), forming a desired 3D shape upon application of external mechanical load. In this paper, a novel inverse design strategy is proposed by modifying the bending stiffness via introducing distributed modulus in functionally graded composites (FGCs). The longitudinal modulus of each cross-sectional slice can be controlled through the rule of mixtures, hence matching the required modulus distribution along the elastic strip. Following the proposed framework, a diverse range of structures is obtained with different Gaussian curvatures in both numerical simulations and experiments. A very good agreement is achieved between the measured shapes of morphed structures and the targets. In addition, the compressive rigidity and specific energy absorption during compression of FGC-based hemi-ellipsoidal morphing structures with various aspect ratios were also examined numerically and validated against experiments. By conducting systematical numerical simulations, we also demonstrate the multifunctionality of the modulus-graded shape-morphing composites. This new inverse design framework provides an opportunity to create shape-morphing structures by utilising modulus-graded composite materials, which can be employed in a variety of applications involving multi-physical environments. Furthermore, this framework underscores the versatility of the approach, enabling precise control over material properties at a local level.