Delay-Doppler Alignment Modulation for Spatially Sparse Massive MIMO Communication (2309.00792v1)

Abstract: Delay alignment modulation (DAM) is an emerging technique for achieving inter-symbol interference (ISI)-free wideband communications using spatial-delay processing, without relying on channel equalization or multi-carrier transmission. However, existing works on DAM only consider multiple-input single-output (MISO) communication systems and assume time-invariant channels. In this paper, by extending DAM to time-variant frequency-selective multiple-input multiple-output (MIMO) channels, we propose a novel technique termed \emph{delay-Doppler alignment modulation} (DDAM). Specifically, by leveraging \emph{delay-Doppler compensation} and \emph{path-based beamforming}, the Doppler effect of each multi-path can be eliminated and all multi-path signal components may reach the receiver concurrently and constructively. We first show that by applying path-based zero-forcing (ZF) precoding and receive combining, DDAM can transform the original time-variant frequency-selective channels into time-invariant ISI-free channels. The necessary and/or sufficient conditions to achieve such a transformation are derived. Then an asymptotic analysis is provided by showing that when the number of base station (BS) antennas is much larger than that of channel paths, DDAM enables time-invariant ISI-free channels with the simple delay-Doppler compensation and path-based maximal-ratio transmission (MRT) beamforming. Furthermore, for the general DDAM design with some tolerable ISI, the path-based transmit precoding and receive combining matrices are optimized to maximize the spectral efficiency. Numerical results are provided to compare the proposed DDAM technique with various benchmarking schemes, including MIMO-orthogonal time frequency space (OTFS), MIMO-orthogonal frequency-division multiplexing (OFDM) without or with carrier frequency offset (CFO) compensation, and beam alignment along the dominant path.