Joint Transmit and Reflective Beamforming Design for IRS-Assisted Multiuser MISO SWIPT Systems (1910.07156v1)

Abstract: This paper studies an intelligent reflecting surface (IRS)-assisted multiuser multiple-input single-output (MISO) simultaneous wireless information and power transfer (SWIPT) system. In this system, a multi-antenna access point (AP) uses transmit beamforming to send both information and energy signals to a set of receivers each for information decoding (ID) or energy harvesting (EH), and a dedicatedly deployed IRS properly controls its reflecting phase shifts to form passive reflection beams for facilitating both ID and EH at receivers. Under this setup, we jointly optimize the (active) information and energy transmit beamforming at the AP together with the (passive) reflective beamforming at the IRS, to maximize the minimum power received at all EH receivers, subject to individual signal-to-interference-plus-noise ratio (SINR) constraints at ID receivers, and the maximum transmit power constraint at the AP. Although the formulated SINR-constrained min-energy maximization problem is highly non-convex, we present an efficient algorithm to obtain a high-quality solution by using the techniques of alternating optimization and semi-definite relaxation (SDR). Numerical results show that the proposed IRS-assisted SWIPT system with both information and energy signals achieves significant performance gains over benchmark schemes without IRS deployed and/or without dedicated energy signals used.