2000 character limit reached
Wykorzystanie rekonfigurowalnych matryc antenowych wraz z informacją kontekstową (2402.17436v1)
Published 27 Feb 2024 in cs.NI and eess.SP
Abstract: Reconfigurable intelligent surfaces can be successfully used to control the radio environment. Simple control of the reflection angle of the signal from the surface allows maximization or minimization of the received power in specific places. The paper presents simulations where it is possible to receive a signal in a place where it was not possible, to detect the occupancy of the spectrum in a place where the sensor was unable to make correct detection or to minimize interference in a specific receiver.
- Höyhtyä Markom. 2016. ”Spectrum Occupancy Measurements: A Survey and Use of Interference Maps”. IEEE Communications Surveys & Tutorials, 18 (4) : 2386-2414.
- Liaskos Christos. 2018. ”A New Wireless Communication Paradigm through Software-Controlled Metasurfaces”. IEEE Communications Magazine, 56 (9) : 162-169.
- Liu Yuanwei. 2021. ”Reconfigurable Intelligent Surfaces: Principles and Opportunities”. IEEE Communications Surveys & Tutorials, 23 (4) : 1546-1577.
- Renzo Marco. 2022. ”Communication Models for Reconfigurable Intelligent Surfaces: From Surface Electromagnetics to Wireless Networks Optimization”. Proceedings of the IEEE, 110 (9) : 1164-1209.