Grasp Force Assistance via Throttle-based Wrist Angle Control on a Robotic Hand Orthosis for C6-C7 Spinal Cord Injury (2402.08020v1)
Abstract: Individuals with hand paralysis resulting from C6-C7 spinal cord injuries frequently rely on tenodesis for grasping. However, tenodesis generates limited grasping force and demands constant exertion to maintain a grasp, leading to fatigue and sometimes pain. We introduce the MyHand-SCI, a wearable robot that provides grasping assistance through motorized exotendons. Our user-driven device enables independent, ipsilateral operation via a novel Throttle-based Wrist Angle control method, which allows users to maintain grasps without continued wrist extension. A pilot case study with a person with C6 spinal cord injury shows an improvement in functional grasping and grasping force, as well as a preserved ability to modulate grasping force while using our device, thus improving their ability to manipulate everyday objects. This research is a step towards developing effective and intuitive wearable assistive devices for individuals with spinal cord injury.
- Y.S. Kang, Y.G. Park, B.S. Lee, H.S Park, “Biomechanical evaluation of wrist-driven flexor hinge orthosis in persons with spinal cord injury,” J. Rehabil. Res. Dev., vol. 50, no. 8, pp. 1129–1138, 2013.
- E. Hays, J. Slayton, G. Tejeda-Godinez, E. Carney, K. Cruz, T. Exley, A. Jafari, “A Review of Rehabilitative and Assistive Technologies for Upper-Body Exoskeletal Devices,” Actuators, vol. 12, no. 4, p. 178, Apr. 2023.
- C.G. Rose and M.K. O’Malley, “Hybrid Rigid-Soft Hand Exoskeleton to Assist Functional Dexterity,” IEEE Robot. Autom. Letters, vol. 4, no. 1, pp. 73–80, 2019.
- H. In, B.B. Kang, M. Sin, and K. Cho, “Exo-Glove: A Wearable Robot for the Hand with a Soft Tendon Routing System,” IEEE Robot. Autom. Mag., vol. 22, no. 1, pp. 97–105, 2015.
- E. Y. Chang, A. I. W. McPherson, R. C. Adolf, Y. Gloumakov, and H. S. Stuart, “Modulating Wrist-Hand Kinematics in Motorized Assisted Grasping With C5-6 Spinal Cord Injury,” IEEE Transactions on Medical Robotics and Bionics, vol. PP, no. 99, pp. 1–1.
- H.-J. Yoo, S. Lee, J. Kim, C. Park, and B. Lee, “Development of 3D-printed myoelectric hand orthosis for patients with spinal cord injury,” J. Neuroeng. Rehabil., vol. 16, no. 1, p. 162, Dec. 2019.