Modeling and analysis of a flexible spinning Euler-Bernoulli beam with centrifugal stiffening and softening: A Linear Fractional Representation approach with application to spinning spacecraft (2401.17519v1)

Abstract: The derivation of a linear fractional representation (LFR) model for a flexible, spinning and uniform Euler-Bernoulli beam is accomplished using the {Lagrange} technique, fully capturing the centrifugal force generated by the spinning motion and accounting for its dependence on the angular velocity. This six degrees of freedom (DOF) model accounts for the behavior of deflection in the moving body frame, encompassing the bending, traction and torsion dynamics. The model is also designed to be compliant with the Two-Input-Two-Output Port (TITOP) approach, which offers the possibility to model complex multibody mechanical systems, while keeping the uncertain nature of the plant and condensing all the possible mechanical configurations in a single LFR. To evaluate the effectiveness of the model, various scenarios are considered and their results are tabulated. These scenarios include uniform beams with fixed root boundary conditions for different values of tip mass, root offset and angular velocity. The results from the analysis of the uniform cantilever beam are compared with solutions found in the literature and obtained from a commercial finite element software. Ultimately, this paper presents a multibody model for a spinning spacecraft mission scenario. A comprehensive analysis of the system dynamics is conducted, providing insights into the behavior of the spacecraft under spinning conditions.