Effect of solute atoms segregation on Al grain boundary properties by First-principles study (2305.16677v1)

Abstract: First-principles calculations were carried out to study the segregation behavior of Mg, and Cu and their effect on the energy and mechanical properties of different Al grain boundaries (GBs). Four symmetrical tilt GBs were selected for study, namely {\Sigma}5001 GB, {\Sigma}5001 GB, {\Sigma}9110 GB, and {\Sigma}11110 GB. The results show that both Mg and Cu have a segregation tendency at the GBs, and the segregation tendency of Cu is stronger than Mg. Mg is prone to form substitutional segregation at the GBs, but Cu is more likely to segregate at the interstitial sites. The segregation of Mg and Cu can reduce GB energy, and the GB energy continues to decrease with the increase of the segregation concentration. First-principles calculation tensile test shows that the segregation of Mg has a negative effect on the strength of GBs, and the GB strength decreases with the increase of the Mg concentration, while the GB strength was gradually enhanced with the increase of the Cu concentration. The strength of {\Sigma}5(210) GB and {\Sigma}9(221) GB are more sensitive to the segregation of solute atoms than the other two GBs. By calculating the charge density and the density of states of the pristine and the segregated GBs, it was found that the segregation of Mg caused charge depletion and structure expansion at the GBs, while the segregation of Cu increases the charge density of GBs and form new bonds with the surrounding Al atoms. The results provide useful information for improving the mechanical properties of materials by using the concept of GB segregation engineering.