Unraveling the paradox of intensity-dependent DVS pixel noise (2109.08640v1)

Abstract: Dynamic vision sensor (DVS) event camera output is affected by noise, particularly in dim lighting conditions. A theory explaining how photon and electron noise affect DVS output events has so far not been developed. Moreover, there is no clear understanding of how DVS parameters and operating conditions affect noise. There is an apparent paradox between the real noise data observed from the DVS output and the reported noise measurements of the logarithmic photoreceptor. While measurements of the logarithmic photoreceptor predict that the photoreceptor is approximately a first-order system with RMS noise voltage independent of the photocurrent, DVS output shows higher noise event rates at low light intensity. This paper unravels this paradox by showing how the DVS photoreceptor is a second-order system, and the assumption that it is first-order is generally not reasonable. As we show, at higher photocurrents, the photoreceptor amplifier dominates the frequency response, causing a drop in RMS noise voltage and noise event rate. We bring light to the noise performance of the DVS photoreceptor by presenting a theoretical explanation supported by both transistor-level simulation results and chip measurements.