Deep Learning Based Frequency-Selective Channel Estimation for Hybrid mmWave MIMO Systems (2102.10847v1)

Abstract: Millimeter wave (mmWave) massive multiple-input multiple-output (MIMO) systems typically employ hybrid mixed signal processing to avoid expensive hardware and high training overheads. {However, the lack of fully digital beamforming at mmWave bands imposes additional challenges in channel estimation. Prior art on hybrid architectures has mainly focused on greedy optimization algorithms to estimate frequency-flat narrowband mmWave channels, despite the fact that in practice, the large bandwidth associated with mmWave channels results in frequency-selective channels. In this paper, we consider a frequency-selective wideband mmWave system and propose two deep learning (DL) compressive sensing (CS) based algorithms for channel estimation.} The proposed algorithms learn critical apriori information from training data to provide highly accurate channel estimates with low training overhead. In the first approach, a DL-CS based algorithm simultaneously estimates the channel supports in the frequency domain, which are then used for channel reconstruction. The second approach exploits the estimated supports to apply a low-complexity multi-resolution fine-tuning method to further enhance the estimation performance. Simulation results demonstrate that the proposed DL-based schemes significantly outperform conventional orthogonal matching pursuit (OMP) techniques in terms of the normalized mean-squared error (NMSE), computational complexity, and spectral efficiency, particularly in the low signal-to-noise ratio regime. When compared to OMP approaches that achieve an NMSE gap of \$\unit[{4-10}]{dB}\$ with respect to the Cramer Rao Lower Bound (CRLB), the proposed algorithms reduce the CRLB gap to only \$\unit[{1-1.5}]{dB}\$, while significantly reducing complexity by two orders of magnitude.