Continuous Toolpath Planning in Additive Manufacturing (1908.07452v2)

Abstract: We develop a framework that creates a new polygonal mesh representation of the sparse infill domain of a layer-by-layer 3D printing job. We guarantee the existence of a single, continuous tool path covering each connected piece of the domain in every layer. We present a tool path algorithm that traverses each such continuous tool path with no crossovers. The key construction at the heart of our framework is an Euler transformation which converts a 2-dimensional cell complex K into a new 2-complex K^ such that every vertex in the 1-skeleton G^ of K^ has even degree. Hence G^ is Eulerian, and a Eulerian tour can be followed to print all edges in a continuous fashion. We start with a mesh K of the union of polygons obtained by projecting all layers to the plane. We compute its Euler transformation K^. In the slicing step, we clip K^ at each layer using its polygon to obtain a complex that may not necessarily be Euler. We then patch this complex by adding edges such that any odd-degree nodes created by slicing are transformed to have even degrees again. We print extra support edges in place of any segments left out to ensure there are no edges without support in the next layer. These support edges maintain the Euler nature of the complex. Finally we describe a tree-based search algorithm that builds the continuous tool path by traversing "concentric" cycles in the Euler complex. Our algorithm produces a tool path that avoids material collisions and crossovers, and can be printed in a continuous fashion irrespective of complex geometry or topology of the domain (e.g., holes). We implement our test our framework on several 3D objects. Apart from standard geometric shapes, we demonstrate the framework on the Stanford bunny.