Large-eddy simulation and modeling of Taylor-Couette flow with an outer stationary cylinder (1908.06577v1)
Abstract: We present wall-resolved large-eddy simulations (LES) of the incompressible Navier-Stokes equations together with empirical modeling for {turbulent} Taylor-Couette {(TC)} flow where the inner cylinder is rotating with angular velocity $\Omega_i$ and the outer cylinder is stationary. A simple empirical model of the turbulent, TC flow is developed consisting of near-wall, log-like turbulent wall layers separated by an annulus of constant angular momentum. The model is closed by a proposed scaling relation concerning the thickness of the wall layer on the inner cylinder. Model results include the Nusselt number $Nu$ (torque required to maintain the flow) and various measures of the wall-layer thickness as a function of both the Taylor {number} $Ta$ and $\eta$. These agree reasonably with experimental measurements, direct numerical simulation (DNS) and the present LES over a range of both $Ta$ and $\eta$. In particular, the model shows that, at fixed $\eta<1$, $Nu$ grows like $Ta{1/2}$ divided by the square of the Lambert, (or Product-Log) function of a variable proportional to $Ta{1/4}$. This cannot be represented by a power law dependence on $Ta$. At the same time the wall-layer thicknesses reduce slowly in relation to the cylinder gap. This suggests an asymptotic, very large $Ta$ state consisting of constant angular momentum in the cylinder gap with $u_\theta = 0.5\,\Omega_i\,R_i2/r$, where $r$ is the radius, with vanishingly thin turbulent wall layers at the cylinder surfaces. An extension of the model to rough-wall turbulent wall flow at the inner cylinder surface is described. This shows an asymptotic, fully rough-wall state where the torque is independent of $Re_i/Ta$, and where $Nu\sim Ta{1/2}$.