Hybrid Offline-Online Design for UAV-Enabled Data Harvesting in Probabilistic LoS Channel (1907.06181v2)

Abstract: This paper considers an unmanned aerial vehicle (UAV)-enabled wireless sensor network (WSN) in urban areas, where a UAV is deployed to collect data from distributed sensor nodes (SNs) within a given duration. To characterize the occasional building blockage between the UAV and SNs, we construct the probabilistic line-of-sight (LoS) channel model for a Manhattan-type city by using the combined simulation and data regression method, which is shown in the form of a generalized logistic function of the UAV-SN elevation angle. We assume that only the knowledge of SNs' locations and the probabilistic LoS channel model is known a priori, while the UAV can obtain the instantaneous LoS/Non-LoS channel state information (CSI) with the SNs in real time along its flight. Our objective is to maximize the minimum (average) data collection rate from all the SNs for the UAV. To this end, we formulate a new rate maximization problem by jointly optimizing the UAV three-dimensional (3D) trajectory and transmission scheduling of SNs. Although the optimal solution is intractable due to the lack of the complete UAV-SNs CSI, we propose in this paper a novel and general design method, called hybrid offline-online optimization, to obtain a suboptimal solution to it, by leveraging both the statistical and real-time CSI. Essentially, our proposed method decouples the joint design of UAV trajectory and communication scheduling into two phases: namely, an offline phase that determines the UAV path prior to its flight based on the probabilistic LoS channel model, followed by an online phase that adaptively adjusts the UAV flying speeds along the offline optimized path as well as communication scheduling based on the instantaneous UAV-SNs CSI and SNs' individual amounts of data received accumulatively.