Black-box Modeling and Compensation of Bursty Communication Signals in RF Power Amplifiers with Power-Dependent Parameters (1410.8119v1)

Abstract: This paper presents a new black-box technique for modeling long term memory effects in radio frequency power amplifiers. The proposed technique extends commonly used behavioral models by utilizing parameters that dynamically change depending on a long term memory effect while keeping the original model structure intact. This enables us to accurately track and model transient changes in power amplifier characteristics that vary slowly and are induced by the input signal. Identification of long term memory effects is discussed and an iterative identification algorithm for the model parameters is proposed. The model is experimentally tested on a 100 Watt Doherty power amplifier with a 4 MHz Gaussian noise signal that has a step--like change in the amplitude, representative of a realistic communication signal with bursty behavior and a 20 MHz 3GPP LTE test data. Results of behavioral modeling show a 2-2.5 dB and 5-6 dB improvement in average and peak NMSE modeling performance respectively, which shows the suitability of the technique to model bursty signals.