Improved Stability Design of Interconnected Distributed Generation Resources

Abstract: This work provides a design method for achieving a specified level of stability for inverter-based interconnected distributed generation. The stability of parallel connected distributed energy resources determined from a linearized state-space model of the inverter dynamics that includes the admittance matrix of the interconnecting distribution lines. Each inverter uses a localized droop control scheme with the associated voltage and frequency measurements obtained through the application of an enhanced phase locked loop. Previous work on this topic has focused on single inverters connected to an infinite bus without modeling of delays from a phase locked loop implementation. This proposed method overcomes both of these limitations of previous research. A detailed large-signal simulation of a three-bus interconnected power system is analyzed under two different network admittance values. Results confirm the effectiveness of the proposed stability design method.