Hash in a Flash: Hash Tables for Solid State Devices (1211.4521v1)

Abstract: In recent years, information retrieval algorithms have taken center stage for extracting important data in ever larger datasets. Advances in hardware technology have lead to the increasingly wide spread use of flash storage devices. Such devices have clear benefits over traditional hard drives in terms of latency of access, bandwidth and random access capabilities particularly when reading data. There are however some interesting trade-offs to consider when leveraging the advanced features of such devices. On a relative scale writing to such devices can be expensive. This is because typical flash devices (NAND technology) are updated in blocks. A minor update to a given block requires the entire block to be erased, followed by a re-writing of the block. On the other hand, sequential writes can be two orders of magnitude faster than random writes. In addition, random writes are degrading to the life of the flash drive, since each block can support only a limited number of erasures. TF-IDF can be implemented using a counting hash table. In general, hash tables are a particularly challenging case for the flash drive because this data structure is inherently dependent upon the randomness of the hash function, as opposed to the spatial locality of the data. This makes it difficult to avoid the random writes incurred during the construction of the counting hash table for TF-IDF. In this paper, we will study the design landscape for the development of a hash table for flash storage devices. We demonstrate how to effectively design a hash table with two related hash functions, one of which exhibits a data placement property with respect to the other. Specifically, we focus on three designs based on this general philosophy and evaluate the trade-offs among them along the axes of query performance, insert and update times and I/O time through an implementation of the TF-IDF algorithm.